OneUp EDC Threadless Carrier

OneUp Components

42.00 $ 46.95
SKU: TAH2OU9550

Share:

A Threadless, no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube. (EDC Tool Sold Separately)

  • The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool
  • Compatible with EDC V2 Tool (You must use the Small EDC V2 Storage Capsule with the Threadless Carrier), the tire plug and bacon strips fit within the small storage capsule
  • Chain pliers are not compatible with the threadless carrier set up
  • The EDC Threadless Carrier is NOT compatible with V1 EDC Tools

Install instructions (Super-Easy Install - takes less than 10 minutes)

ENSURE YOUR FORK IS COMPATIBLE - VERY IMPORTANT

STEERER TUBE LENGTH  

Most forks are compatible, except for a small number of forks with very short steerer tubes. Fork steerer tubes must meet the minimum length requirements outlined below...

  • Fox except Fox 38 with oval steerer = Minimum of 190mm
  • RockShox Forks = Minimum of 220mm
  • All other compatible Forks = Minimum of 190mm

Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem

Incompatible Forks: Fox 38 with oval steerer (Use a EDC Threaded install), Rock Shox 35 Forks, Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers